Filter
Set Descending Direction

179 items

Page
per page
View as Grid List
  1. Product SKU:
    41631

    4-Pin Connector/Housing-Set with Snap-In Nose for Type 250 Connectors (#40164) - not compatible to housing Art. 41552-4, because latch on other side
    Usage:
    Regulator with 4-pin connector, cable harness side (XT500'86-, div. XT600/XTZ660/XTZ750)
    €5.50
    Incl. 19% VAT,excl. Shipping Cost
  2. Product SKU:
    50583U

    Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt
    Usage:
    XT250, XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V))
    €14.50
    Incl. 19% VAT,excl. Shipping Cost
  3. Product SKU:
    50584U

    Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt, optimized mounting position
    Usage:
    XT500'80- (Hupen siehe Art. 41012/41506 (6V) bzw. 41132 (12V))
    €14.50
    Incl. 19% VAT,excl. Shipping Cost
  4. Product SKU:
    50767

    12V Conversion 'DC only', incl. lighting coil, 12V rectifier/regulator, loom modification required, CDI see item 50595 if necessary
    Usage:
    XT500 ONLY in combination with LED front light (e.g. LED insert 50768), suitable for original breaker ignition or CDI conversion
    €209.00
    Incl. 19% VAT,excl. Shipping Cost
  5. Product SKU:
    22078

    Ground Wire, with eyelet and Japan bullet connector
    Usage:
    XT500'78
    €5.87
    Incl. 19% VAT,excl. Shipping Cost
  6. Product SKU:
    41503

    Cable Solder Connector for 4-6qmm Wires, butt connector incl. solder, which soldering and sealing during heating like a heat shrink tube
    Usage:
    Strip two cable ends, insert into the connector and heat - ready soldered & insulated!
    €1.70
    Incl. 19% VAT,excl. Shipping Cost
  7. Product SKU:
    51078

    Sealing Plug Breaker Contact Shaft, replaces shaft sealing ring item 27328, enables disassembly of contacts incl. shaft when converting to CDI ignition
    Usage:
    TT500, XT500 converted to CDI ignition; see Powerdynamo (31348, 31349) or PME (50555, 50556, 50595)
    €8.82
    Incl. 19% VAT,excl. Shipping Cost
  8. Product SKU:
    41589

    Kill Switch ('dead man'-switch) for contact- and CDI ignitions (contact open, when actuated/used), 2-pole, 22mm clamp diameter for handlebar mounting
    Usage:
    Cable Length approx. 58cm, tear-off line min. 30cm, max. approx. 120cm
    €18.50
    Incl. 19% VAT,excl. Shipping Cost
  9. Product SKU:
    40427-1W

    Signal PickupType JIS TYPE2, waterproof, suitable for KOSO #40419
    Usage:
    e.g. TT500, XT500, SR500
    €26.50
    Incl. 19% VAT,excl. Shipping Cost
  10. Product SKU:
    50551-S

    Add-On Kit H4 for Item 50544 12V Conversion, includes all bulbs, closed SLA battery, flasher relay, horn, headlight and adapter wiring loom
    Usage:
    XT250, XT500 (The battery is delivered dry and without acid pack - battery acid can be bought e.g. in workshops)
    €92.50 €7.50
    Incl. 19% VAT,excl. Shipping Cost
  11. -2%

    Product SKU:
    41473SLA

    SLA Battery 6V / 6.0Ah, maintenance free filled, leak-proof due to SLA- technology Type 6N6-3B-1 OEM-ref.-no. 1E6-82110-19
    Usage:
    XT250, XT500
    was €28.50 Special Price €27.84 €7.50
    Incl. 19% VAT,excl. Shipping Cost
  12. Product SKU:
    31304-Y

    Powerdynamo Extension Kit H4 incl. Reflector, adapter loom, YUASA battery, bulbs, horn and small parts
    Usage:
    XT500 with Powerdynamo #31348
    €96.00 €7.50
    Incl. 19% VAT,excl. Shipping Cost
  13. Product SKU:
    SCHLUESSEL

    Replacement Key, for main switch, side cover lock, fuel filler cap or helmet lock, customer-specific, 1 pair
    Usage:
    We need the number engraved on the front or rear of the main switch, as well as the year and model of the motorcycle
    €34.50
    Incl. 19% VAT,excl. Shipping Cost
Filter
Set Descending Direction

179 items

Page
per page
View as Grid List